Rain Bird 25MM DVF Series Solenoid Valve

Description

Features

Double-filtered (diaphragm and solenoid) pilot-flow design for maximum reliability and grit resistance

Buna-N, balanced pressure diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring

Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 micron) solenoid filter

Unique, easy-to-turn pressure assisted flow control mechanism (DVF models only)

External bleed to manually flush the system of dirt and debris during installation and system start-up

Internal bleed for spray-free manual operation

Accepts Rain Bird TBOS latching solenoid for use with most battery-operated controllers

Operates in low-flow and Landscape Drip applications when a 200 mesh filter is installed upstream

*Not recommended for use with two-wire control systems

Specs

Pressure: 15 to 150 psi (1,0 to 10,4 bar)

100-DVF Flow Control Model: 0.2 to 40 gpm (0,05 to 9.085 m³/h; 0,01 to 2,52 l/s); For flows below 3 gpm (0,68 m³/h; 0,19 l/s) or any Landscape Drip application, use a 200 mesh filter installed upstream

24 VAC 50/60Hz (cycles per second) solenoid power requirement: 0.450A inrush current, 0.25A holding current

Dimensions: DVF Valves

Height : 5 3/5″ (14.2 cm)

Length: 4 3/8″ (11.1 cm)

Length (MB): 5¾” (14.6 cm)

Width: 3 1/3″ (8.4 cm)

Recommendations:

Rain Bird recommends flow rates that result in discharge velocities in the supply line not to exceed 7.5 ft/sec (2.3 m/s) in order to reduce the effects of water hammer

Rain Bird residential valves cannot be used with PRS pressure regulating modules

Compatible with ESP-LXIVM 2-wire systems when used with the IVMSOL. Not recommended for use in other 2-wire systems